UV Resin Fest für DLP-Drucker

UV Resin Fest für DLP-Drucker

UV-Resin Fest für DLP-Drucker

Firm UV polymers are ideal for making objects where you want it to be very hard with slight compressive ability under high force. Objects will bend a little and stretch slightly when under duress. They exhibit good tensile shear properties with limited elongation. Objects can only be bent and compressed with considerable force.

Hardness: 40 Shore D

NOTE: Objects will have full strength only after 2H post exposure under UV light (36W). If you post expose for less time, objects will be weaker.

Printed parts should be cleaned with soap and hot water and then transferred into a water bath to post cure under UV for 5 minutes per side. To get the best out of the resins as soon as possible, the prints should be post cured for 2 hours total. Flexible prints may still feel sticky to the touch after post-curing which can be fixed by wiping with an IPA cloth.

Note: Our resins have been designed to be as safe as possible however working with them requires care, similar to working with common adhesives or household cleaners. When using our resins always wear gloves, and avoid skin contact. For further information regarding our resins refer to the safety data sheet for each resin type.


Zeige 1 bis 2 (von insgesamt 2 Artikeln)
Seiten: 1
Preise inklusive Mwst. und zzgl. Versandkosten
Parse Time: 0.166s